iDea CAR MP3 FM Modulator
　　for iPod touch / classic / nano3
　|　FM Transmitter　|　FM TX Nano II　|　CAR MP3 FM Modulator　|
Features:
  • Read MP3 files from the USB flash disk directly and broadcast through the car FM radio.
  • Transmit music from external audio player (CD, MP3 player etc.) to the FM radio.
  • Frequency display and working state indicator. Rotary joint design convenient to adjust the device's position.
  • 14 preset channels within 87.7 ~ 88.9 and 106.7 ~ 107.9MHz frequency range.
  • Car cigarette lighter power supply (12V DC power).
  • Last selected frequency restoration.
Getting Started:
Opton (1) Listening to the music stored in the USB flash disk
  Step 1: Insert the cigarette plug on device into car cigarette socket to draw 12V DC power.
Step 2: Plug the USB flash disk that stores MP3 files into the USB powrt.
  Step 3: Press the "CH" key to select the preset channel without signal interference. You can see the selected frequency indicated on the display.
  Step 4: Tune the car FM radio to the same channel as indicated on the display. Now you can enjoy MP3 music with excellent quality through the FM stereo audio set.
Option (2) Listening to the music from an external audio device such as CD, MP3 player
  Step 1: Connect one end of the LINE-IN cable to the line-in jack of the car MP3 player and connect the other end to the earphone jack of the external audio device.
Step 2: Turn on the external audio player and play the music.
  Step 3: Press the "CH" key to select the preset channel without signal interference. You can see the selected frequency indicated on the display.
  Step 4: Turn the car FM radio to the same channel as indicated on the display. Now you can enjoy MP3 music with excellent quality through the FM stereo audio set.
Operations of the keys on the device:
  Play/Pause： Press this key to play the MP3 file on the USB flash disk. The frequency is indicated on the display. To pause during playback, press this key again, the red LED stop flashing and is steadily on. To resume, pressit again.
  Previous： (a) Press this key to play the previous track.
(b) Press and hold this key to decrease volume.
  Next： (a) Press this key to play the next track.
(b) Press and hold this key to increase volume.
  Channel： Press this key to switch between 14 preset channels. The 14 preset channels include 87.7, 87.9, 88.1, 88.3, 88.5, 88.7, 88.9, 89.1, 106.7, 107.1, 107.3, 107.5, 107.9, 108.1MHz. When you switch to a certain channel, the frequency is indicated on the display.
  Note: When you use the LINE-IN function, the four keys except "CH" keys are unavailable. You may listen to the music by operating the control keys on the external audio player.
Operations of the keys on the Remote control:
  Play/Pause： Press this key to play the MP3 file on the USB flash disk. THe frequency is indicated on the display. To pause during playback, press this key again, the red LED stop flashing and is steadily on. To resume, press it again.
  Prev： Press this key to play the previous track.
  Next： Press this key to play the next track.
  Vol+： Press this key to increase volume.
  Vol-： Press this key to decrease volume.
  Freq+： Press this key to increase the FM frequency.
  Freq-： Press this key to decrease the FM frequency.
Notice:
  1. Operation voltage for the device is +12V. Too high or too low voltage could cause the device damaged or failed.
  2. For the sake of safety, please insert the USB flash disk before you plug the device into the car cigarette socket.
  3. The device supports most USB flash disks except a few.
  4. Frequency of the car FM radio should be the same as that of the car MP3 player.
  5. You'd better not pull out the USB flash disk during playback. Pause the playback first.
  6. The progress may be slow when the USB flash disk stores too many audio files.
  7. In order to extend the device life, please do not keep it in use for too long.