iDea FM Transmitter

Built-in clock and thermometer.

 | FM Transmitter | FM TX Nano II | CAR MP3 FM Modulator |
Briefings:
  • The iDea FM Transmitter allows you to play the iPod, MP3 player and PSP wirelessly via your car stereo.
  • Supports 87.5 - 108MHz Full FM frequencies, up to 200 channels selectable (interval 0.1MHz).
  • Features the convenient Local Temperature, Time and Battery sensor with LCD display.
  • Enjoy the Sony-Ericsson phones' music on the home stereo (directly, or via the iDea Wireless Dock).
  • Listen to the Sony-Ericsson phones' music on your Car Stereo, via the optional FM Transmitter.
Features:
  • The iDea FM Transmitter contains 2 parts :
    (1) FM Transmitter w/full channels, and
    (2) Car Charger (w/USB cable).
  • Built-in clock and LCD Display.
  • Built-in Thermometer, temperature LCD display.
  • Select any FM channels from 87.5 ~ 108.0MHz (up to 200 channels, 0.1MHz stepping), besides, you can set 3 preferred channels for easy pick-up in the future.
  • It provides great flexibility for connecting your favourite portable device.
  • Digital PLL (phase-lock logic) support, wave signal transmission and reception will not be affected even in places subject to extreme change in temperature. Additionly, using the "digital tuning" avoids the fussy frequency modulation.
  • This device can be used with many audio devices. It is applicable with the iPod, iPod Nano, iPod Mini, MP3, MP4, CD, VCD, DVD, Cassette Player. Camera, Game Console, PC & Laptop Computer.
  • The iDea FM Transmitter allows you to stream your iPod or PSP tunes wirelessly through your car speakers.
  • The Car Charger provides stable and pure +5V voltage for the iPod, it has the safety fuse protection circuitry built-in.
  • EAN Code: 4711671021619
Quick Start:
This FM transmitter shall work together with a FM Radio either in car (recommended) or in room. Follow the procedure listed below:
  1. Put two pieces 1.5V AAA batteries in the battery compartment.
  2. Press the power ON button, it'll enter in the "Transmit mode", the LCD shows the current transmit frequency.
  3. Tune FM Transmitter to an unoccupied channel, lest it should be interfered by signals from broadcasting station.
  4. FM Radio can be tuned to FM Transmitter's frequency either manually or automatically.
  5. Press ▲ or ▼ button to increase or decrease adjusted frequencies. Press ON/OFF button once again to stop transmit and the current time will be showing on the LCD display.
  6. To store the preferred channels (up to 3 channels), press down the M1, M2 or M3 button for about 3 seconds to get it memoried. To use the stored channels, press M1, M2 or M3 button again, and it will show up.
  7. LCD Display with Backlight - Display FM frequency, Temperature, Time and Battery status.
  8. Change TIME : press and hold SET button for about 3 seconds to enter the Setting mode, the number of the minute will flash, press ▲ or ▼ button to set the number, press SET button to confirm. Repeating this procedure to set up the minute and hour. The LCD will show the time after let alone for about 3 seconds.
  9. Automatically power off after standing by two minutes.
Troubleshooting and Tips:
  • If you find a poor sound quality on the FM transmitter, it might be owing to the interference caused by the nearby channels' side band signals (2nd harmonics …). Please select an unoccupied and clean channel then test it again.
  • Please use it on car (as it was designed to). The device shall be less interfered when operating in an open field. You shall be able to find a clean and unoccupied channel for better transmission.
  • If you try to use it at home, you shall remove all possible radio frequency interfering signal sources like microwave oven, cordless phone, or any home appliances that may generate a wide spectrum of noise (which will interfere all FM channels).
  • To save time in tuning, you may save your selected frequency of channels into the built-in three "Preset" memories.

87.5~108MHz, 200+ channels

76.0~90.0, 140 channels
(for Japan)